Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Patio Cleaning for Exposed Aggregate in Clanton, AL brings it back, usually in a single visit. On exposed aggregate, the method we use is moderate-pressure wash.
Method and pressure
Cleaning solution: A concrete pre-treatment and degreaser as needed.
Caring for exposed aggregate
Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.
Avoid: High pressure at edges and cracks, which can pop out aggregate.
How often: Clean yearly; reseal every 2-3 years.
Is it time for patio cleaning for exposed aggregate?
- Green or black growth between pavers or on shaded concrete
- Grease spots near the grill
- Stains from planters, leaves and furniture
- Weeds in the joints
- White chalky haze on pavers or stone
Where the grime comes from
- Shade and damp soil around the patio
- Cooking grease and food spills
- Rust from metal furniture and planters
- Efflorescence (salts) rising out of masonry
Safe steps for homeowners
- Move planters now and then so they don't leave rings
- Clean grill grease quickly with dish soap and hot water
- Pull weeds from joints before they spread
- Sweep often so leaves don't stain
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Blowing joint sand out of pavers
- Etching or pitting soft stone like travertine and sandstone
- Acid cleaners on limestone and travertine
- Stripping an existing sealer unevenly
How we handle patio cleaning for exposed aggregate
- Check the patio material and any sealer
- Move furniture and protect nearby plants
- Pre-treat growth, grease and stains
- Clean with the right pressure and tools
- Rinse, re-sand joints if needed, and walk the patio with you
How much does patio cleaning for exposed aggregate cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for exposed aggregate
- Pressure Washing for Exposed Aggregate
- Driveway Cleaning for Exposed Aggregate
- Sidewalk & Walkway Cleaning for Exposed Aggregate
- Pool Deck Cleaning for Exposed Aggregate
- Concrete Sealing for Exposed Aggregate
- Oil Stain Removal for Exposed Aggregate
Local patio cleaning for exposed aggregate for Clanton, AL
Shaded driveways, walkways and pool decks in Alabama grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.
Spring pollen season in Alabama coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.
Red clay soil is common in parts of Alabama. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.
Crews serve all of Clanton (ZIP codes 35045 and 35046), plus Thorsby (7.3 mi), Jemison (10.8 mi), Calera (19.6 mi) and Pine Level (20 mi). Call (555) 010-0000 for a free quote in Clanton.
Patio Cleaning for Exposed Aggregate: frequently asked questions
How much does patio cleaning for exposed aggregate cost in Clanton, AL?
Patio Cleaning for Exposed Aggregate typically costs $150-$400 for a typical backyard patio, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for patio cleaning for exposed aggregate?
For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.
Is patio cleaning for exposed aggregate safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule patio cleaning for exposed aggregate?
Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.